Changes between Version 1 and Version 2 of TracUpgrade


Ignore:
Timestamp:
Jul 30, 2012 5:29:28 PM (12 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracUpgrade

    v1 v2  
    11= Upgrade Instructions = 
    22[[TracGuideToc]] 
     3[[PageOutline(2-3,,inline,unnumbered)]] 
    34 
    4 A Trac environment sometimes needs to be upgraded before it can be used with a new version of Trac. This document describes the steps necessary to upgrade an environment. 
     5== Instructions == 
    56 
    6  '''Note''': ''Environment upgrades are not necessary for minor version releases unless otherwise noted. For example, there's no need to upgrade a Trac environment created with (or upgraded) 0.8.0 when installing 0.8.4 (or any other 0.8.x release).'' 
     7Typically, there are seven steps involved in upgrading to a newer version of Trac: 
    78 
    8 == General Instructions == 
     9=== 1. Bring your server off-line 
    910 
    10 Typically, there are four steps involved in upgrading to a newer version of Trac: 
     11It is not a good idea to update a running server: the server processes may have parts of the current packages cached in memory, and updating the code will likely trigger [#ZipImportError internal errors].  
    1112 
    12 === Update the Trac Code === 
     13=== 2. Update the Trac Code === #UpdatetheTracCode 
    1314 
    14 Get the new version of Trac, either by downloading an offical release package or by checking it out from the [http://projects.edgewall.com/trac/wiki/SubversionRepository Subversion repository]. 
     15Get the new version as described in TracInstall, or your operating system specific procedure. 
    1516 
    16 If you're doing a major version upgrade (such as from 0.8 to 0.9), it is ''highly'' recommended that you first remove the existing Trac code. To do this, you need to delete the `trac` directory from the Python `lib/site-packages` directory. You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac` (the exact location depends on your platform). 
     17If you already have a 0.11 version of Trac installed via `easy_install`, it might be easiest to also use `easy_install` to upgrade your Trac installation: 
    1718 
    18 If you have a source distribution, you need to run 
    1919{{{ 
    20 python setup.py install 
     20# easy_install --upgrade Trac==0.12 
    2121}}} 
    2222 
    23 to install the new version. If you've downloaded the Windows installer, you execute it, and so on. 
     23If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows ([trac:#7265]). 
    2424 
    25 === Upgrade the Trac Environment === 
     25You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac `.egg` files from former versions. 
     26The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical: 
     27 * on Linux: `/usr/lib/python2.X/site-packages` 
     28 * on Windows: `C:\Python2.X\lib\site-packages` 
     29 * on MacOSX: `/Library/Python/2.X/site-packages` 
    2630 
    27 Unless noted otherwise, upgrading between major versions (such as 0.8 and 0.9) involves changes to the database schema, and possibly the layout of the [wiki:TracEnvironment environment directory]. Fortunately, Trac provides automated upgrade scripts to ease the pain. These scripts are run via [wiki:TracAdmin trac-admin]: 
     31You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac`. (The exact location depends on your platform.) 
     32 
     33This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things. 
     34 
     35=== 3. Upgrade the Trac Environment === #UpgradetheTracEnvironment 
     36 
     37Environment upgrades are not necessary for minor version releases unless otherwise noted.  
     38 
     39After restarting, Trac should show the instances which need a manual upgrade via the automated upgrade scripts to ease the pain. These scripts are run via [TracAdmin trac-admin]: 
    2840{{{ 
    2941trac-admin /path/to/projenv upgrade 
     
    3244This command will do nothing if the environment is already up-to-date. 
    3345 
    34 Note that if you are using a PostgreSQL database, this command will fail with the message that the environment can only be backed up when you use an SQLite database. This means that you will have to backup the repository and the database manually. Then, to perform the actual upgrade, run: 
     46Note that a backup of your database will be performed automatically prior to the upgrade.  
     47This feature is relatively new for the PostgreSQL or MySQL database backends, so if it fails, you will have to backup the database manually. Then, to perform the actual upgrade, run: 
    3548{{{ 
    3649trac-admin /path/to/projenv upgrade --no-backup 
    3750}}} 
    3851 
    39 === Update the Trac Documentation === 
     52=== 4. Update the Trac Documentation === #UpdatetheTracDocumentation 
    4053 
    41 Every [wiki:TracEnvironment Trac environment] includes a copy of the Trac documentation for the installed version. As you probably want to keep the included documentation in sync with the installed version of Trac, [wiki:TracAdmin trac-admin] provides a command to upgrade the documentation: 
     54Every [TracEnvironment Trac environment] includes a copy of the Trac documentation for the installed version. As you probably want to keep the included documentation in sync with the installed version of Trac, [TracAdmin trac-admin] provides a command to upgrade the documentation: 
    4255{{{ 
    4356trac-admin /path/to/projenv wiki upgrade 
    4457}}} 
    4558 
    46 Note that this procedure will of course leave your `WikiStart` page intact. 
     59Note that this procedure will leave your `WikiStart` page intact. 
    4760 
    48 === Restart the Web Server === 
    4961 
    50 In order to reload the new Trac code you will need to restart your web server (note this is not necessary for [wiki:TracCgi CGI]). 
     62=== 5. Refresh static resources === 
    5163 
    52 == Specific Versions == 
     64If you have set up a web server to give out static resources directly (accessed using the `/chrome/` URL) then you will need to refresh them using the same command: 
     65{{{ 
     66trac-admin /path/to/env deploy /deploy/path 
     67}}} 
     68this will extract static resources and CGI scripts (`trac.wsgi`, etc) from new Trac version and its plugins into `/deploy/path`. 
    5369 
    54 The following sections discuss any extra actions that may need to be taken to upgrade to specific versions of Trac. 
     70Some web browsers (IE, Opera) cache CSS and Javascript files aggressively, so you may need to instruct your users to manually erase the contents of their browser's cache, a forced refreshed (`<F5>`) should be enough. 
     71{{{#!comment 
     72Remove above note once #9936 is fixed. 
     73}}} 
    5574 
    56 == From 0.9.x to 0.10.x == 
     75=== 6. Steps specific to a given Trac version  === 
     76==== Upgrading from Trac 0.11 to Trac 0.12 ==== 
    5777 
    58 Due to some changes in the Wiki syntax, you may notice that certain parts of your pages no longer work as expected: 
    59  * Previously, links to images would result in that image being embedded into the page. Since 0.10, links to images remain plain links. If you want to embed an image in the page, use the `[[Image]]` macro. 
    60  * You can no longer use `%20` in wiki links to encode spaces. Instead, you should quote the name containing spaces (for example, use `wiki:"My page"` instead of `wiki:My%20page`.) 
     78===== Python 2.3 no longer supported ===== 
     79The minimum supported version of python is now 2.4 
    6180 
    62 Several enhancements have been made to the version control subsystem, in particular for the support of scoped repositories has been improved.  
    63 It is recommended that you perform a [TracAdmin#InteractiveMode trac-admin] '''`resync`''' operation to take advantage of these improvements. 
     81===== SQLite v3.x required ===== 
     82SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See [trac:PySqlite#UpgradingSQLitefrom2.xto3.x] for details. 
    6483 
    65 Also note that the argument list of the [TracAdmin trac-admin] '''`initenv`''' command has changed: there's a new argument for determining the type of version control system. The old usage was: 
    66 {{{ 
    67    initenv <projectname> <db> <repospath> <templatepath> 
    68 }}} 
    69 The new usage is: 
    70 {{{ 
    71    initenv <projectname> <db> <repostype> <repospath> <templatepath> 
    72 }}} 
    73 If you're using any scripts that automate the creation of Trac environments, you will need to update them. If you're using Subversion, specify `svn` for the `<repostype>` argument. 
     84===== PySqlite 2 required ===== 
     85PySqlite 1.1.x is no longer supported. Please install 2.5.5 or later if possible (see [#Tracdatabaseupgrade Trac database upgrade] below). 
    7486 
    75 == From 0.9.3 to 0.9.4 == 
     87===== Multiple Repository Support ===== 
     88The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration. 
    7689 
    77 There is a bug in Pysqlite 1.x that causes reports using the "%" character for `LIKE` clauses or date formatting to fail.  You will need to use escape the percent characters with another: "%%". 
     90This may be of interest to users with only one repository, since there's now a way to avoid the potentially costly resync check at every request. 
    7891 
    79 == From 0.9.x to 0.9.3 or later == 
     92===== Resynchronize the Trac Environment Against the Source Code Repository ===== 
    8093 
    81 If you are using plugins you might need to upgrade them. See http://projects.edgewall.com/trac/milestone/0.9.3 for further details. 
    82  
    83 == From 0.9-beta to 0.9 == 
    84  
    85 If inclusion of the static resources (style sheets, javascript, images) is not working, check the value of the `htdocs_location` in trac.ini. For [wiki:TracModPython mod_python], [wiki:TracStandalone Tracd] and [wiki:TracFastCgi FastCGI], you can simply remove the option altogether. For [wiki:TracCgi CGI], you should fix it to point to the URL you mapped the Trac `htdocs` directory to (although you can also remove it and then [wiki:TracCgi#MappingStaticResources map the static resources]). If you're still having problems after removing the option, check the paths in the `trac/siteconfig.py` file and fix them if they're incorrect. 
    86  
    87 If you've been using plugins with a beta release of Trac 0.9, or have disabled some of the built-in components, you might have to update the rules for disabling/enabling components in [wiki:TracIni trac.ini]. In particular, globally installed plugins now need to be enabled explicitly. See TracPlugins and TracIni for more information. 
    88  
    89 If you want to enable the display of all ticket changes in the timeline (the “Ticket Details” option), you now have to explicitly enable that in [wiki:TracIni trac.ini], too: 
     94Each [TracEnvironment Trac environment] must be resynchronized against the source code repository in order to avoid errors such as "[http://trac.edgewall.org/ticket/6120 No changeset ??? in the repository]" while browsing the source through the Trac interface: 
    9095 
    9196{{{ 
    92 [timeline] 
    93 ticket_show_details = true 
     97trac-admin /path/to/projenv repository resync '*' 
    9498}}} 
    9599 
    96 == From 0.8.x to 0.9 == 
     100===== Improved repository synchronization ===== 
     101In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories. 
    97102 
    98 [wiki:TracModPython mod_python] users will also need to change the name of the mod_python handler in the Apache HTTPD configuration: 
     103While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories. 
     104 
     105Note that if you were using the `trac-post-commit-hook`, ''you're strongly advised to upgrade it'' to the new hook documented in the above references, as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications. 
     106 
     107===== Authz permission checking ===== 
     108The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka `[trac] authz_file` and `authz_module_name`), you must add `AuthzSourcePolicy` in front of your permission policies in `[trac] permission_policies`. You must also remove `BROWSER_VIEW`, `CHANGESET_VIEW`, `FILE_VIEW` and `LOG_VIEW` from your global permissions (with `trac-admin $ENV permission remove` or the "Permissions" admin panel). 
     109 
     110===== Microsecond timestamps ===== 
     111All timestamps in database tables (except the `session` table) have been changed from "seconds since epoch" to "microseconds since epoch" values. This change should be transparent to most users, except for custom reports. If any of your reports use date/time columns in calculations (e.g. to pass them to `datetime()`), you must divide the values retrieved from the database by 1'000'000. Similarly, if a report provides a calculated value to be displayed as a date/time (i.e. with a column named "time", "datetime", "changetime", "date", "created" or "modified"), you must provide a microsecond timestamp, that is, multiply your previous calculation with 1'000'000. 
     112 
     113==== Upgrading from Trac 0.10 to Trac 0.11 ==== 
     114===== Site Templates and Styles ===== 
     115The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information. 
     116 
     117If you are using custom CSS styles or modified templates in the `templates` directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance. 
     118 
     119===== Trac Macros, Plugins ===== 
     120The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of [trac:ClearSilver] and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins. 
     121 
     122===== For FCGI/WSGI/CGI users ===== 
     123For those who run Trac under the CGI environment, run this command in order to obtain the trac.*gi file: 
    99124{{{ 
    100    from: PythonHandler trac.ModPythonHandler 
    101    to:   PythonHandler trac.web.modpython_frontend 
     125trac-admin /path/to/env deploy /deploy/directory/path 
    102126}}} 
    103127 
    104 If you have [http://initd.org/tracker/pysqlite PySQLite] 2.x installed, Trac will now try to open your SQLite database using the SQLite 3.x file format. The database formats used by SQLite 2.8.x and SQLite 3.x are incompatible. If you get an error like ''“file is encrypted or is not a database”'' after upgrading, then you must convert your database file. 
     128This will create a deploy directory with the following two subdirectories: `cgi-bin` and `htdocs`. Then update your Apache configuration file `httpd.conf` with this new `trac.cgi` location and `htdocs` location. 
    105129 
    106 To do this, you need to have both SQLite 2.8.x and SQLite 3.x installed (they have different filenames so can coexist on the same system). Then use the following commands: 
    107 {{{ 
    108  $ mv trac.db trac2.db 
    109  $ sqlite trac2.db .dump | sqlite3 trac.db 
    110 }}} 
     130===== Web Admin plugin integrated ===== 
     131If you had the webadmin plugin installed, you can uninstall it as it is part of the Trac code base since 0.11. 
    111132 
    112 To update multiple database files at once on linux you may use the following command (replace {{{/var/trac}}} withe the location where your trac installtions reside): 
    113 {{{ 
    114  $ find /var/trac/ -iname "trac.db" | xargs -i bash -c "mv {} {}.2; sqlite {}.2 .dump | sqlite3 {};" 
    115 }}} 
     133=== 7. Restart the Web Server === #RestarttheWebServer 
    116134 
    117 Remember the give the webserver write permission to trac.db. 
     135If you are not running [wiki:TracCgi CGI], reload the new Trac code by restarting your web server. 
    118136 
    119 After testing that the conversion was successful, the `trac2.db` file can be deleted. For more information on the SQLite upgrade see http://www.sqlite.org/version3.html. 
     137== Known Issues == 
    120138 
    121 == From 0.7.x to 0.8 == 
     139Things you should pay attention to, while upgrading. 
    122140 
    123 0.8 adds a new roadmap feature which requires additional permissions. While a 
    124 fresh installation will by default grant ROADMAP_VIEW and MILESTONE_VIEW 
    125 permissions to anonymous, these permissions have to be granted manually when 
    126 upgrading: 
    127 {{{ 
    128  $ trac-admin /path/to/projectenv permission add anonymous MILESTONE_VIEW 
    129  $ trac-admin /path/to/projectenv permission add anonymous ROADMAP_VIEW 
    130 }}} 
     141=== Customized Templates 
     142 
     143Trac supports customization of its Genshi templates by placing copies of the templates in the `<env>/templates` folder of your [TracEnvironment environment] or in a common location specified in the [[TracIni#GlobalConfiguration| [inherit] templates_dir]] configuration setting. If you choose to do so, be wary that you will need to repeat your changes manually on a copy of the new templates when you upgrade to a new release of Trac (even a minor one), as the templates will likely evolve. So keep a diff around ;-) 
     144 
     145The preferred way to perform TracInterfaceCustomization is to write a custom plugin doing an appropriate `ITemplateStreamFilter` transformation, as this is more robust in case of changes: we usually won't modify element `id`s or change CSS `class`es, and if we have to do so, this will be documented in the TracDev/ApiChanges pages. 
     146 
     147=== !ZipImportError === 
     148 
     149Due to internal caching of zipped packages,  whenever the content of the packages change on disk, the in-memory zip index will no longer match and you'll get irrecoverable !ZipImportError errors. Better anticipate and bring your server down for maintenance before upgrading. 
     150See [trac:#7014] for details. 
     151 
     152=== Wiki Upgrade === 
     153`trac-admin` will not delete or remove default wiki pages that were present in a previous version but are no longer in the new version. 
     154 
     155=== Trac database upgrade === 
     156 
     157A known issue in some versions of PySqlite (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket [trac:#9434]. 
     158 
     159=== parent dir === 
     160If you use a trac parent env configuration and one of the plugins in one child does not work, none of the children work. 
     161 
     162== Related topics 
     163 
     164=== Upgrading Python === 
     165 
     166Upgrading Python to a newer version will require reinstallation of Python packages: Trac of course; also [http://pypi.python.org/pypi/setuptools easy_install], if you've been using that.  Assuming you're using Subversion, you'll also need to upgrade the Python bindings for svn. 
     167 
     168==== Windows and Python 2.6 ==== 
     169 
     170If you've been using !CollabNet's Subversion package, you may need to uninstall that in favor of [http://alagazam.net/ Alagazam], which has the Python bindings readily available (see TracSubversion).  The good news is, that works with no tweaking. 
     171 
     172=== Changing Database Backend === 
     173==== SQLite to PostgreSQL ==== 
     174 
     175The [http://trac-hacks.org/wiki/SqliteToPgScript sqlite2pg] script on [http://trac-hacks.org trac-hacks.org] has been written to assist in migrating a SQLite database to a PostgreSQL database 
     176 
     177=== Upgrading from older versions of Trac === #OlderVersions 
     178 
     179For upgrades from versions older than Trac 0.10, refer first to [trac:wiki:0.10/TracUpgrade#SpecificVersions]. 
    131180 
    132181-----